Important Points To Follow When Installing Under-Floor Heating

 Installing an underfloor tile heating unit is not easy. If the unit has not been installed by an expert team, then the system could fail. The installation process is also very expensive. So you need to take all precautions when selecting any system to install in your house.

You can install the same system in the bathroom and other rooms. You can collect relevant information related to “bathroom heating” units online. You can also get in touch with professional under-tile heating unit installation services. As these types of installations are common, you come across many professional companies offering these services.

There are a few sets of points that you should keep in mind when making your choice. You can continue reading further for more information.

Select right heat source

You can select a different heating source. You have two main choices – without pump or with pump installations. You have to make this choice depending on the total coverage area. This installation depends upon the area you want to install your heating system. For larger areas, you can best choose a unit that is equipped with a pump set. 

This is important so the heat can be transferred to each room. The pump set will be used for pumping the water through the network of pipes installed under the floor tiles. You need to select a genuine distribution system.

Select right control unit

If the heat is produced, then it has to be regulated. If the heat is not regulated then the unit will burn out early. So it is important to manage the heat produced in the heating system. The pipes may get overheated. This can damage the entire unit. So it is important to decide to select the right grade control unit.

Always ensure the control unit is installed in a safe place. You should be able to access the temperature control unit at any time.

Select the border zone

Any heating unit is more effective if it has a border zone. This is the area that is generally outside the heating unit range. The border zone will also act as a trapping zone for cold air. If the cold zone is wider, then the heating unit might not be very much effective.

You have to ensure that the heat is distributed evenly indoors. The cold zone should not exceed a few millimeters in width.

Select ideal manifold location

Manifold location is important. The entire plan has to be designed by an expert designer. The pipes should not trap the heat in one location under the tile. The pipes should also offer a smooth path for the heat.

You can place the manifold in the easy-to-access location. Always ensure the selected area is indoors so you can access it at any time. Do not select a very complex design. Always try to get an easily manageable design for heating.

It is also effective to calculate the efficiency of the unit. The unit should not lose a lot of heat. You may have to allow the professional team to design the entire layout.